Athlon Series- High Speed Hydraulic Blow Molding Machine
Designed in German, the brand new Athlon Series extrusion blow molding machine is exceeding even more. Equipped with the new designed clamping unit, the machines can run more smoothly and faster. More importantly, the RCI(Rapid Cooling Installation) exchanges the hot and cold air at the same time to increase the speed by 30%-40%.
The quick mold change system and external machine adjustment not only increases the production efficiency but also protects the workers’ safety.
The machine has a linear rail directive blowing pin for higher accuracy and less friction.
✓Single/Double Station
✓Single/Double/Triple/Quadruple..8 Head
✓Production Volume:2ml~30L
✓Multi layers: Co-Extrusion 1-6 Layers
Leshan Athlon Series- High Speed Hydraulic Blow Molding Machine
- Very stiff clamping design with two C-frame plates.
- FEM optimized analysis of bending and stress.
- Movements on linear rails.
| Athlon Series Full Hydraulic | ||||
| Model | 500 | 650 | 900 | |
| Mould Width a | mm | 480 | 630 | 880 |
| Mould Height b | mm | 380 | 410 | 380 |
| Mold Thickness c | mm | 115 | 115 | 115 |
| Daylight Of Closed Clamping d_min | mm | 230 | 230 | 230 |
| Daylight Of Open Clamping d_max | mm | 480 | 480 | 480 |
| Effective Dimension Of Mold Plate | mm W×H | 380x465 | 615x505 | 750x465 |
| Carriage Stroke | (mm) | 500 | 650 | 900 |
| Clamping Force | kN | 165 | 256 | 256 |
| Max. die size of head (berlin series) | centre-distance | No. of cavities | ||
| 40mm; 1-2 layer | 80 | 5 | 6 | 10 |
| 60mm; 1-2 layer | 100 | 4 | 5 | 8 |
| 70mm; 1-2 layer | 125 | 3 | 4 | 6 |
| 105mm; 1-2 layer | 170 | 2 | 3 | 4 |
| 120mm; 1-2 layer | 190 | 2 | 2 | 4 |
| 160mm; 1-2 layer | 250 | 1 | 2 | 3 |
| 200mm;1-2 layer | - | 1 | 1 | - |
| Production example | ||||
| Bottle | No. of Heads | Youtube Link | ||
| 3 Liter Detergent | 3 | https://youtu.be/GoakwiO0pzM | ||
| 3 Liter Detergent | 2 | https://youtu.be/fLECm5Auo3w | ||
| 1,3 Liter Can | 4 | https://youtu.be/p-TizpPblCE | ||